Making And Ending Calls; Making A Call - TANDBERG Videoconferencing System Short User Manual

General use

Making and ending calls

Making a call

connect To make a call, enter the number or the IP-address of the unit you wish to call using the Dialing keys
and press C
ONNECT
Net: Auto
To make a call via a LAN, enter an IP-address by using a * as the 'dot' in the IP-address, e.g. 123*3*0*12 will be
interpreted as 123.3.0.12. If a gatekeeper is present, you may place IP-calls using "telephone-style" numbers (an
E.164 alias), according to the numbering plan implemented in the gatekeeper. The dialed number will then be
translated into an IP-address by the gatekeeper.
Answer a call
To answer a call, press C
connect
Manual answer of a call is needed if the autoanswer facility is switched off.
End a call
To end a call, press D
disconnect
Correcting keying mistakes
To delete the last digit (or character) entered, press D
delete
TANDBERG Videoconferencing System
.
.
ONNECT
.
ISCONNECT
Quality: Auto
E
TIP NDING A CALL
S
WITCHING OFF THE MONITOR
A CALL
DISCONNECT KEY
.
ELETE
4
( )
S WILL NOT DISCONNECT
. T
O DISCONNECT A CALL YOU SHOULD PRESS THE
.