Trend Screen And Brine Meter - BWT AQA perla Installation And Operating Manual

Log
Unit logbook
Measured values
Trend screen
Trend screen
Brine meter
Start-up date
= Start-up date (entered automatically from 1 m³
water consumption)
PU version
S o f t w a r e ve r s i o n n u m b e r o f t h e p o w e r
electronics
DU version
S o f t wa r e ve r s i o n nu m b e r o f t h e d i s p l ay
electronics

Trend screen and brine meter

Press Trend screen
The Trend screen shows the flow over time for the
past 24 hours, divided into three 8-hour intervals.
1 = 0:00 - 8:00
2 = 8:00 - 16:00
3 = 16:00 - 24:00
Press Brine meter
The brine meter display allows you to keep track of
brine extraction.
Extraction progress is shown by a graphic and a
percentage countdown.
Failure to fully extract the brine indicates a fault; e.g.,
that the operating pressure is too low.
This information is displayed until the start of the
100% next regeneration.
EN
71
71