Finely Adjusting Outlet Water Hardness - BWT AQA perla Installation And Operating Manual

EN
245 l
IN:
OUT:
IN:
OUT:
66
10:10:37
10
121 l
Hardness
22°d
6°d
Hardness
22°d
Motor blending
6 °d
OK

Finely adjusting outlet water hardness

Fully open the tap at the nearest cold water tap point
and use the AQUATEST hardness tester to test the
outlet water hardness.
If the value measured differs from the set value
(OUT), you can finely adjust the settings.
Press the water droplet
Press the manual operation button
Motor blending appears.
The wheel turns when motor blending is running.
Press the up arrow to increase water hardness.
Press the down arrow to reduce water hardness.