Technical Data - Hilti SF 22-A Original Operating Instructions

Overloading or overheating are not indicated by the charge status
display.
3.4 Li­ion battery display
The charge status of the Li-ion battery and malfunctions of the power tool are
indicated by the display on the Li­ion battery. The charge status of the Li­ion
battery is displayed after pressing one of the two battery release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks, the power tool is
ready for use.
1 LED blinks, the power tool is not
ready for use.
4 LEDs blink, the power tool is not
ready for use.
Battery charge status cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given
in the Troubleshooting section.
3.5 Items supplied
Drill / driver, side handle, operating instructions.
• Other system products approved for use with this product can be found
at your local Hilti Store or online at: www.hilti.group
4

Technical data

4.1 Drill/driver
Rated voltage
Weight in accordance with EPTA Pro-
cedure 01 including B22⁄8.0 battery
Speed
*362170*
1st gear
2nd gear
362170
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
The battery has overheated or is
completely discharged.
The power tool is overloaded or has
overheated.
SF 22-A
21.6 V
3.1 kg
0 /min ...
370 /min
0 /min ...
1,250 /min
SFH 22-A
21.6 V
3.2 kg
0 /min ...
370 /min
0 /min ...
1,250 /min
English 25