ORIGINAL OPERATING INSTRUCTIONS SF 22‑A / SFH 22‑A cordless drill / driver 1 These numbers refer to the illustrations. You can It is essential that the operating instructions find the illustrations at the beginning of the operating are read before the power tool is operated for instructions.
Make a note of this data in your operating instructions and always refer to it when making an enquiry to your Hilti representative or Direct Rated speed...
Page 7
e) Do not overreach. Keep proper footing and bal- d) Under abusive conditions, liquid may be ejected ance at all times. This enables better control of the from the battery; avoid contact. If contact acci- dentally occurs, flush with water. If liquid contacts power tool in unexpected situations.
The SF 22-A is a hand-held, cordless drill/driver for driving and removing screws and for drilling in steel, wood and plastic. The SFH 22-A is a hand-held, cordless hammer drill/driver for driving and removing screws, for drilling in steel, wood and plastic and for hammer drilling in lightweight concrete and masonry.
LED 1, 2, 3, 4 Power tool overloaded or overheated 4 Technical data Right of technical changes reserved. Power tool SF 22-A SFH 22-A Rated voltage (DC voltage) 21.6 V 21.6 V Weight in accordance with EPTA 2.52 kg 2.58 kg...
Power tool SF 22-A SFH 22-A Drilling diameter range in wood ∅ 1.5…20 mm ∅ 1.5…20 mm (hard) Drilling dia. range in metal ∅ 1.5…13 mm ∅ 1.5…13 mm NOTE The sound pressure and vibration values given in these instructions have been measured in accordance with a standardized test and may be used to compare one electric tool with another.
NOTE The connection end of the insert tool must be clean and CAUTION lightly greased. Use Hilti grease as it is compatible with The power tool may suddenly swing to the side (rotate the tool’s sealing system. about its own axis) when drilling, hammer drilling or screwdriving.
- If use continues, further battery discharge will be not use a spray, steam pressure cleaning equipment or stopped automatically before the battery cells suffer damage. - Charge the batteries using the specified and approved Hilti battery chargers for Li‑ion batteries. 8 Troubleshooting Fault Possible cause Remedy The power tool doesn’t run.
Batteries that have reached the end of their life must be disposed of in accordance with national regulations or returned to Hilti. Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools or appliances for recycling.
11 EC declaration of conformity (original) Hilti Corporation, Feldkircherstrasse 100, Designation: Cordless drill / driver FL‑9494 Schaan Type: SF 22‑A / SFH 22‑A Generation: Year of design: 2008 We declare, on our sole responsibility, that this product Paolo Luccini Tassilo Deinzer...