Accessories For Attachment To Industrial Ethernet; Accessories For The Device Variant With Connector For External Antenna - Siemens SIMATIC NET IE/WSN-PA Link Compact Operating Instructions

2.2.2

Accessories for attachment to Industrial Ethernet

Accessories for the IE/WSN-PA Link
Suitable products are available for outdoor installation of the Ethernet cabling. The following
products are not supplied with the IE/WSN-PA Link.
● Adapter cable M12 female NPT 1/2" to RJ-45 jack, length 11 cm
● Ethernet SIMATIC NET IE FC standard cable GP 2x2
● M12 male connector IE FC M12 Plug PRO for assembly in the field
2.2.3

Accessories for the device variant with connector for external antenna

Optional accessories
Note
Minimum attenuation of 4 dB required
When using the ANT792-6MN antenna (antenna gain 6 dBi), the antenna cable must have
an attenuation of at least 4 dB. This is the case with the antenna cable 6XV1 875-5AN10
(length 10 m).
When using the antenna cable 6XV1 875-5AN10 (length 1 m), an additional attenuator with
at least 4 dB must be inserted in the cable.
The following accessories for the device variant 6GK1 411-6CA40-0BA0 are not supplied
with the IE/WSN-PA Link:
● External antenna ANT792-6MN
● Lightning protector LP798-1N
● Antenna cable (10 m) N-Connect Male/Male Flexible Connection Cable
IE/WSN-PA Link
Compact Operating Instructions, 12/2012, A5E02509264-AD
Harting Electronics GmbH & Co KG
Order no. 21 03 683 6420
You will find information on ordering options at the following address:
(www.harting.com) → "contact" → "address"
Order no. 6XV1 840-2AH10
The cable is not suitable for underground installation.
Order no. 6GK1 901-0DB20-6AA0
Order no. 6GK5 792-6MN00-0AA6
Order no. 6GK5 798-2LP00-2AA6
Order no. 6XV1 875-5AN10
2.2 Components of the product and accessories
Product description
55