Ordinary Location Certification for FM
As standard, the Link has been examined and tested to determine that the design meets
basic electrical, mechanical, and fire protection requirements by FM, a nationally recognized
testing laboratory (NRTL) as accredited by the Federal Occupational Safety and Health
Administration (OSHA).
North American certifications
FM Division 2, Non-Incendive
Non-incendive for Class I, Division 2, Groups A, B, C, and D.
Dust Ignition-proof for Class II, III, Division 1,
Groups E, F, and G; Indoors/outdoor locations;
NEMA Type 4X
Temperature code: T4 (T
Canadian Standards Association (CSA)
CSA Division 2, Non-Incendive
Suitable for Class I, Division 2, Groups A, B, C, and D.
Dust Ignition-proof for Class II, Groups E, F, and G;
Suitable for Class III Hazardous Locations.;
Install per Siemens drawing A5E02467236A.
Temperature code: T4 (T
CSA Enclosure Type 4X
Information on directives of the European Union
The product meets the requirements of the following directives:
● ATEX directive (94/9/EC)
● Electromagnetic compatibility (EMC) (2004/108/EC)
● Directive (R&TTE) (1999/5/EC)
You will find the EC Declaration of Conformity for this product on the Internet at the following
address:
10805878 (http://support.automation.siemens.com/WW/view/en/10805878)
→ "Entry list" tab
Filter settings:
● Entry type: "Certificates"
● Certificate type: "EC Declaration of Conformity"
● Search item(s): IE/WSN-PA Link
IE/WSN-PA Link
Compact Operating Instructions, 12/2012, A5E02509264-AD
: - 40 °C to + 60 °C)
a
: - 40 °C to + 60 °C)
a
Approvals
85