Telecom Behnke myintercom Plus Instructions Manual page 69

myintercom Plus IP video door intercom Instructions
GB
Configuration
the user can be more easily identified later. It
Here you assign a doorbell to the user:
" without enter-
is not possible to "Save
ing a name. Make a note of the access data
displayed here ("User" and "Password"). It will
be needed later when the app for accessing
the video door station is configured. This is
described in the next chapter "Adding video
door stations". Press Doorbell to select the
doorbell button, which is to be assigned to
the user. This user receives a push message
as soon as the assigned doorbell button is
pressed. Each user can be assigned one door-
bell button. In this way, each doorbell button is
configured as if it were a separate myintercom
system. If the user wants to be notified for more
than one doorbell button, several users have
to be created and several door stations have to
be set up on the user's terminal device (one per
doorbell button). Press "Save" to add the user
" deletes
to the video door station. "Delete
the user from the video door station. This
deleted user then no longer has any access to
" changes
the video door station. "Change
the user's password. A new random password
is generated and saved in the camera. Then
enter this new password on the smartphone or
" ,
tablet PC of the user. Press "Send by email
to send the currently displayed user details by
email.
www.behnke-online.de 69