Attaching The Door Station - Telecom Behnke myintercom Plus Instructions Manual

Ip video door station

Hide thumbs Also See for myintercom Plus:

Table of Contents

Available languages

Enlarged version

myintercom Plus IP video door intercom Instructions

Introduction

1.7. Attaching the door station

Prepare the on-wall housing for cable entry

Insert the door station in the housing and use four

screws to screw it onto the on-wall housing.

Then screw on the screw covers - finished!

The example shows the installation of the

on-wall variant. The door station can alter-

natively also be installed as a concealed

"in-wall" installation. In this case the suitable

in-wall housing is installed in the wall opening

or in the cavity cutout and the door station is

fixed in place as shown.

Attach the housing and connect the door station

www.behnke-online.de

Table of Contents

Table of Contents

Do you have a question about the myintercom Plus and is the answer not in the manual?