Telecom Behnke myintercom Plus Instructions Manual page 64

myintercom Plus IP video door intercom Instructions
GB
Card reader
The second master card can now be removed.
The display goes out.
Note: A transponder that has already been
saved as an ID pass cannot be used as the
2nd master card. In this case the display
jumps to the corresponding memory location.
Deleting the second master card
It is not possible to delete the factory master
card. To delete the 2nd master card you will
need the "factory master card".
Hold the factory master card in front of
the card reader. The memory locations are
counted off up to 190 ("
display then appears:
Remove the factory master card from the card
reader. The display lights up continuously
for approx. 3 seconds and then flashes for
approx. 6 seconds.
64
"). The following
1.9
Hold the factory master card in front of
the card reader. The second master card is
deleted and the right-hand decimal point is no
longer lit.
The factory master card can now be removed.
The display goes out.
www.behnke-online.de