System requirements
The following minimum requirements are nec-
essary for use of the myintercom IP video
door station:
▸
Two-wire technology variant: Two-wire
telecommunication cable
▸
Ethernet variant: PoE (to IEEE 802.af-2003)
fed Cat5 ethernet cable
▸
Unused network port at the switch/router
▸
WLAN
▸
The myintercom app from the Apple
AppStore or Google PlayStore
▸
DHCP Server, which issues an IP address,
subnet mask, gateway and DNS server
(Standard)
▸
Optionally, if access to the door station is
also required outside of the LAN, e.g. away
from home via the internet: Landline
network broadband internet connection
(without proxy/socks server) via an internet
provider, e.g. DSL 2000 or faster. Flatrate
(data volume) recommended. The door
intercom must be able to set up a direct
connection with the internet (without proxy/
socks server).
▸
iOS 5 and higher – iPhone4S, iPhone5, iPad
with activated Apple ID for downloading the
free app
▸
Android 4 and higher – smartphones and
tablet PCs (at least Dual Core Processor 2 x
1.2 GHz or faster) and activated Google Play
account for downloading the free app
www.behnke-online.de
myintercom Plus IP video door intercom Instructions
Attention: Please keep the "Setup" leaflet
in a safe place. It is not possible to change
the configuration at a later date without the
access data printed on it.
GB
Introduction
45
Need help?
Do you have a question about the myintercom Plus and is the answer not in the manual?