Extended Function Commands
4.4.31
F100 PE ADD - Peer Add
Use Peer Add to temporarily add an NTP peer node to be polled. After logging out, when
you log back in the original peer settings will be active.
To add a peer, send the following command:
For example:
4.4.32
F100 PE REM - Peer Remove
Use Peer Remove to temporarily remove an NTP peer node from the polling list. After
logging out, when you log back in the original peer settings will be active.
To remove a peer, send the following command:
For example:
4.4.33
F100 PI - PING
Use F100 PI to ping a remote host to see if it is reachable.
To ping a known host, send the following command:
For example:
An example unit response:
4.4.34
F100 PT - Time
Use F100 PT to display UTC time in seconds.
To see UTC time in seconds, send the following command:
An example unit response:
6000-100Ch4.fm Rev. D
F100 PE ADD<IP Address><Enter>
F100 PE ADD 206.254.000.021<Enter>
F100 PE REM<IP Address><Enter>
F100 PE REM 206.254.000.021<Enter>
F100 PI<IP Address><Enter>
F100 PI 206.254.000.021<Enter>
PING: Remote Host Reachable.
F100 PT<Enter>
UTC: 990467862
TimeVault™ User's Manual
Chapter 4: Serial or Telnet I/O Functions
4-85
Need help?
Do you have a question about the Time Server and is the answer not in the manual?
Questions and answers