Symmetricom Time Server User Manual page 39

Front Panel Interface
Front Panel Network Parameter Display
The following sequence appears on the front panel alphanumeric display when you
repeatedly press the SET-UP push-button. After first power-up, if you enable the Display
Security feature, you must enter your user ID and password before these parameters
appear on the display.
The values illustrated below are examples only. If you are ready to configure TimeVault for
the first time, go now to Section 2.5 "NET Port Network Parameters: First Time
Configuration" on page 2-28.
1. IP Address.
An example of the display is:
2. Subnet Mask.
An example of the display is:
3. Default Gateway.
An example of the display is:
4. DHCP.
An example of the display is:
5. Remote Control.
An example of the display is:
6. Display Security.
An example of the display is:
6000-100Ch2.fm Rev. D
255.054.000.034
IP ADDRESS
255.054.000.034
SUBNET MASK
255.054.000.034
DEFAULT GATEWAY
DHCP Status
OFF
Remote Control
Unlocked
Display Security
OFF
TimeVault™ User's Manual
Chapter 2: Installation and Start-Up
2-25