F100 Sm - Subnet Mask; F100 G - Gateway - Symmetricom Time Server User Manual

Extended Function Commands
4.4.5 F100 SM – Subnet Mask
To return the subnet mask of the NET Port, send the following command:
The unit responds:
An example of the response is:
Changing the Subnet Mask requires the unit to reset. A verification prompt appears
prior to execution.
To set the subnet mask and restart the unit, send the following command:
Sample entry:
The response is:
As a safety feature, after sending this command, you have 10 seconds to respond
affirmatively (enter the letter "y") to the confirmation prompt, after which the unit
executes the command and resets. Within that 10 second time period, any other response,
including no response, results in the unit canceling the command.
4.4.6 F100 G – Gateway
To obtain the Default Gateway of the unit NET Port, send the following command:
The unit responds:
An example of the response is:
Changing the Default Gateway requires the unit to reset. A verification prompt
appears prior to execution.
To set the Default Gateway and restart the unit, send the following command:
Sample entry:
The response is:
As a safety feature, after sending this command, you have 10 seconds to respond
affirmatively (enter the letter "y") to the confirmation prompt, after which the unit
executes the command and resets. Within that 10 second time period, any other response,
including no response, results in the unit canceling the command.
6000-100Ch4.fm Rev. D
F100 SM<Enter>
F100 SM:nnn.nnn.nnn.nnn<CR><LF>
F100 SM:255.255.255.125
F100 SM:nnn.nnn.nnn.nnn<Enter>
F100 SM:255.255.255.240<Enter>
Are you sure?(y/N)<CR><LF>
F100 G<Enter>
F100 G:nnn.nnn.nnn.nnn<CR><LF>
F100 G:206.54.0.1
F100 G:nnn.nnn.nnn.nnn<Enter>
F100 G:206.54.0.17<Enter>
Are you sure?(y/N)<CR><LF>
TimeVault™ User's Manual
Chapter 4: Serial or Telnet I/O Functions
4-63