Symmetricom Time Server User Manual page 126

Appendix D: SNMP – Simple Network Management Protocol
TrueTime DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32
FROM SNMPv2-SMI
CounterFROM RFC1155-SMI
DisplayStringFROM SNMPv2-TC
TRAP-TYPEFROM RFC-1215;
--iso
org
dod
internet
private
enterprises
trueTimeEnt OBJECT IDENTIFIER ::= { enterprises 1896 }
TrueTime MODULE-IDENTITY
LAST-UPDATED
ORGANIZATION
CONTACT-INFO
DESCRIPTION
::= { trueTimeEnt 0 }
trapMsg
ntp
ntsControl
gps
acts
trapMsgColdStart OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is an ASCII string sent to UDP port 162 (or user defined) when
the TrueTime time server reinitializes. The message is Cold Start Trap
PDU from: ###.###.###.###. Where ###.###.###.### is the doted
decimal notation of the IP address of the booting unit."
::= { trapMsg 1 }
trapMsgNtpAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is an ASCII-string sent to the UDP-trap port 162 (or user defined)
when the TrueTime time server's detects change of the NTP-status. This
could be due to a line breakage in the timing source, loss of GPS
satellites, etc. The message is 'NTP Status aaaaaaaa', where aaaaaaaaa can
be NTP UNLOCKED, NTP client mode or NTP LOCKED."
::= { trapMsg 2 }
D-112
OBJECT IDENTIFIER ::= { 1 }
OBJECT IDENTIFIER ::= { iso 3 }
OBJECT IDENTIFIER ::= { org 6 }
OBJECT IDENTIFIER ::= { dod 1 }
OBJECT IDENTIFIER ::= { internet 4 }
OBJECT IDENTIFIER ::= { private 1 }
"9906190000Z"
"TRUETIME INC."
"Technical Support"
"TrueTime Enterprise MIB"
OBJECT IDENTIFIER ::= { trueTimeEnt 1 }
OBJECT IDENTIFIER ::= { trueTimeEnt 2 }
OBJECT IDENTIFIER ::= { trueTimeEnt 3 }
OBJECT IDENTIFIER ::= { trueTimeEnt 4 }
OBJECT IDENTIFIER ::= { trueTimeEnt 5 }
TimeVault™ User's Manual
Symmetricom SNMP Enterprise MIB
6000-100AppD.fm Rev. D