Hyperterminal - Symmetricom Time Server User Manual

Serial Access
3.3.2

HyperTerminal

Starting HyperTerminal
To start HyperTerminal:
1. Click Start on the task bar in the lower left corner of your screen.
2. Select Programs > Accessories > HyperTerminal > HyperTerminal.
The Connection Description dialog box appears:
3. Enter a name (in this example, we have used "NTS") for this connection in the
Name box and click OK.
The Connect To dialog box appears:
6000-100Ch3.fm Rev. D TimeVault™ User's Manual
Chapter 3: Remote Operation
3-43