Function Commands; F03 - Time And Date Request; F18 - Software Version Request - Symmetricom Time Server User Manual

Chapter 4: Serial or Telnet I/O Functions
4.3

Function Commands

4.3.1 F03 – Time and Date Request
Use Function F03 to request time and date. The response is UTC date and time.
To request TIME AND DATE, send the following command:
The unit responds:
where
Sample Entry:
The response might be:
4.3.2 F18 – Software Version Request
Use Version Request to query the software version number of the unit. The version
number is factory set and cannot be changed. This command is for backwards
compatibility and is identical to the F100 VER command (see page 4-66).
4-54
F03<Enter>
F03<SP><mm>/<dd>/<yyyy><SP><HH>:<MM>:<SS><CR><LF>
F =
03 =
<SP> =
<mm> =
/ =
<dd> =
<yyyy> =
<HH> =
: =
<MM> =
<SS> =
; =
<Enter> =
<CR><LF> =
F03<Enter>
F03 UTC 01/07/1996 02:48:29<CR><LF>
ASCII character F
function number
space
one- or two-digit month
ASCII character slash
one- or two-digit day
four-digit year (if you manually entered this data)
one- or two-digit hours
ASCII character for a colon
two-digit minutes
two-digit seconds
replacement character
input line terminator
output line terminator
TimeVault™ User's Manual
Function Commands
6000-100Ch4.fm Rev. D