Table of Contents
Advertisement
Chapter 4: Serial or Telnet I/O Functions
To write the file to the flash, send the F100 BH command with the FTP host, file
path and name, and then send the following command:
The unit responds:
If you answer "y" and press Enter, the unit executes the command.
As a safety feature, after sending this command, you have 10 seconds to respond
affirmatively (enter the letter "y") to the confirmation prompt, after which the unit
executes the command and resets. Within that 10 second time period, any other response,
including no response, results in the unit canceling the command.
Unit example execution:
4-78
F100 BU<Enter>
Are you sure? (y/N)
Burning Prog1
Burning file 182-9004v001.bin with size 688052 to
partition 1: sector :6
Sec: 6
Sec: 7
Sec: 8
Sec: 9
Sec: 10
Sec: 11
Sec: 12
Sec: 13
Sec: 14
Sec: 15
Sec: 16
Flash successfully programmed CRC32 = 0x88841B88
TimeVault™ User's Manual
re:
0
re:
0
re:
0
re:
0
re:
0
re:
0
re:
0
re:
0
re:
0
re:
0
re:
0
Extended Function Commands
6000-100Ch4.fm Rev. D
- Quick Links:
- Ntp Mode
Hide quick links:
Advertisement
Table of Contents
