Setting Up The Ebike System; Requirements; Switching The Ebike System On/Off - Bosch Kiox Original Operating Instructions

Online-version
Hide thumbs Also See for Kiox:
Table of Contents

Advertisement

English – 14
– <Factory reset>
You can select this menu item to restore the on-board computer to fac-
tory settings.

Setting up the eBike system

Requirements

The eBike system can only be activated when the following requirements are
met:
– A sufficiently charged eBike battery is inserted (see battery operating in-
structions).
– The on-board computer is properly inserted in the holder.

Switching the eBike system on/off

The following options are available for switching on the eBike system:
– Put the on-board computer in the holder (5).
– When the on-board computer and the eBike battery are inserted, briefly
press the on/off button (4) of the on-board computer.
– With the on-board computer inserted, press the on/off button on the
eBike battery (some bicycle manufacturer-specific solutions prevent ac-
cess to the battery on/off button; see the battery operating instructions).
The drive is activated as soon as you start pedaling (except for in the push
assistance function or with the assistance level OFF). The motor output de-
pends on which assistance level is set on the on-board computer.
As soon as you stop pedaling when in normal operation, or as soon as you
have reached a speed of 20/28mph, the eBike drive unit switches off the
assistance. The drive is automatically re-activated as soon you start ped-
alling again and the speed is below 20/28 mph.
The following options are available for switching off the eBike system:
– Briefly press the on/off button (4) of the on-board computer.
– Switch off the eBike battery using its on/off button (some bicycle manu-
facturer-specific solutions prevent access to the battery on/off button;
see the bicycle manufacturer operating instructions).
– Remove the on-board computer from its holder.
If no power is drawn from the eBike drive for about ten minutes (e.g. be-
cause the eBike is not moving) and no button is pressed on the on-board
1 270 U20 Ken | (13.11.2018)
Bosch eBike Systems

Advertisement

Table of Contents
loading

Table of Contents