Bosch Kiox Original Operating Instructions page 13

English – 11
Note: To prevent the on-board computer falling out of the holder in the
event of impact, the on-board computer can also be secured with a securing
strap (available as an option).
To remove the on-board computer, hold it by the top end and pull it towards
you until it disengages from the magnetic holder.
When you park up the eBike, remove the on-board computer.
u
The on-board computer can be secured in place to prevent it from being re-
moved from the holder. To do this, loosen the headset screw (16) until the
Kiox holder can be swivelled sideways. Put the on-board computer in the
holder. Screw the locking screw (M3 thread, 6 mm long) from below into the
thread provided in the on-board computer (using a longer screw may dam-
age the on-board computer). Swivel the holder back into place and tighten
the headset screw in accordance with the manufacturer's specifications.
Bosch eBike Systems 1 270 U20 Ken | (13.11.2018)