Bosch Kiox Original Operating Instructions page 31

Code Cause
605 Battery temperature er-
ror during charging
606 External battery fault
610 Battery voltage fault
620 Charger fault
640 Internal battery fault
655 Multiple battery faults
656 Software version error
7xx Gearbox fault
800 Internal ABS fault
810 Implausible signals at the
wheel speed sensor
820 Fault in the line to the
front wheel speed sensor
821... Implausible signals at the
826 front wheel speed sensor
Sensor disc potentially
unavailable, faulty or in-
correctly mounted; sig-
Bosch eBike Systems
Remedy
Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
Disconnect the charger from the bat-
tery. Leave the battery to cool down. If
the problem persists, contact your
Bosch eBike dealer.
Check the wiring. Restart the system. If
the problem persists, contact your
Bosch eBike dealer.
Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
Replace the charger. Contact your
Bosch eBike dealer.
Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
Switch the eBike system off. Take the
battery out and put it back in. Restart
the system. If the problem persists,
contact your Bosch eBike dealer.
Contact your Bosch eBike dealer and
ask them to update the software.
Please read the operating manual pro-
vided by the gearbox manufacturer.
Contact your Bosch eBike dealer.
Contact your Bosch eBike dealer.
Contact your Bosch eBike dealer.
Restart the system and carry out a test
ride for at least two minutes. ABS indi-
cator light should switch off. If the prob-
lem persists, contact your Bosch eBike
dealer.
1 270 U20 Ken | (13.11.2018)
English – 29