Bosch Kiox Original Operating Instructions page 18

English – 16
This mode can only be activated by pressing and holding the on/off but-
ton (4) of the on-board computer (for at least eight seconds).
If the on-board computer does not start when the on/off button (4) is
pressed briefly, the on-board computer is in storage mode.
You can deactivate storage mode by pressing the on/off button (4) for at
least two seconds.
The on-board computer detects whether it is in fully working order. If you
press and hold the on/off button (4) for at least eight seconds while the on-
board computer is in fully working order, it will go into storage mode. If, con-
trary to expectations, the Kiox is not in working order and cannot be oper-
ated, pressing and holding the on/off button (for at least eight seconds) will
reset it. After being reset, the on-board computer will restart automatically
after approx. 5 seconds. If the Kiox does not restart, press the on/off but-
ton (4) for two seconds.
To reset the Kiox to its factory settings, select <Settings> → <Sys settings>
→ <Factory reset>. All user data will be lost.
1 270 U20 Ken | (13.11.2018) Bosch eBike Systems