Displays And Settings Of The On-Board Computer; Operating Logic - Bosch Kiox Original Operating Instructions

English – 17
Displays and settings of the on-board
computer
Note: All interface displays and texts on the following pages correspond to
the release status of the software. The interface displays and texts may
change slightly following a software update.

Operating logic

You can use the < (10) and > (8) buttons to switch between the different
riding value information pages (even while riding). This way, you can keep
both hands on the handlebars while cycling.
You can use the + (12) and – (11) buttons to increase or decrease the assis-
tance level. If you are in a list (e.g. the <Settings> menu), you can use these
buttons to scroll up or down in the list.
The <Settings> that can be accessed via the status page cannot be changed
while riding.
You can use the select button (9) to perform the following functions:
– You can access the quick menu while riding.
– You can access the settings menu from the status page while stationary.
– You can confirm values and acknowledge informative hints.
– You can exit a dialogue.
If the on-board computer is removed from its holder and not switched off, it
will display information regarding the last journey, as well as status informa-
tion, on loop.
If no button is pressed after the on-board computer is removed from the
holder, it will switch itself off after one minute.
Bosch eBike Systems 1 270 U20 Ken | (13.11.2018)