Voip Mode - Yeastar Technology TA Series How To Connect

How to Connect Yeastar TA FXS Gateway to 3CX

3. VoIP Mode

If you choose VoIP mode, the FXS ports will be registered as the 3CX's SIP
extensions, whose functions are the same with other SIP extensions on 3CX.
Figure 3. Connect TA3200 and 3CX Phone System via VoIP Mode
Step 1. Create a SIP extension on 3CX phone system.
Create an extension on 3CX phone system for the FXS port on the TA3200 which has
connected an analog phone. Here we take extension 100 for example.
Figure 4. Create Extension 9000 on 3CX Phone System
Step 2. Configure one VoIP server template on Yeastar TA3200.
Path: Gateway→VoIP Settings→VoIP Server Settings
Check "Enable Register", fill in the 3CX phone system IP address, this VoIP server
template will configured as a VoIP mode template.
5/14