Advertisement
How to Connect Yeastar TA FXS Gateway to 3CX
2. Preparation
Yeastar TA3200 attempts to contact a DHCP server in your network to obtain valid
network settings (e.g., the IP address, subnet mask, default gateway address and
DNS address) by default.
Before connecting Yeastar TA3200 to 3CX phone system, you need to set a static IP
address from the same LAN with the 3CX phone system.
Steps to set static IP for Yeastar TA3200:
1. Connect one analog phone in one of the FXS ports on Yeastar TA3200;
2. Dial "***" to enter the voice menu;
3. Press "1" to check the IP address;
4. Open the browser and type in the TA3200's IP address to access TA3200;
5. Log in TA3200 and go to System→Network Preferences→LAN Settings, disable
DHCP and configure the LAN network, save and apply the changes, reboot Yeastar
TA3200 to take effect.
Figure 2. Configure LAN Settings on Yeastar TA3200
4/14
Advertisement
