Controlling The Audio Device (Bluetooth Connection) - Sony WI-1000XM2 Help Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WI-1000XM2

Controlling the audio device (Bluetooth connection)

If your Bluetooth device supports the device operating function (compatible protocol: AVRCP), then the following
operations are available. The available functions may vary depending on the Bluetooth device, so refer to the operating
instructions supplied with the device.
Each button has the following function:
(play)
Press once during pause to start playback.
Press once during playback to pause.
Press quickly twice to skip to the beginning of the next track. (
Press quickly 3 times to skip to the beginning of the previous track (or the current track during playback). (
Press quickly twice, holding the second press to fast-forward. Release the button at the desired playback point. (
)
Press quickly 3 times, holding the third press to fast-reverse. Release the button at the desired playback point. (
)
+ (volume +)/- (volume -)
Adjust the volume.
Note
If the communication condition is poor, the Bluetooth device may react incorrectly to the operation on the headset.
The available functions may vary depending on the connected device. In some cases, it may operate differently or may not work
at all even when the operations described above are performed.
5-008-613-11(1) Copyright 2019 Sony Corporation
83
)
)