Sony WI-1000XM2 Help Manual page 59

Help Guide
Wireless Noise Canceling Stereo Headset
WI-1000XM2
Connecting to a paired computer (Windows 8.1)
Before starting the operation, make sure of the following:
Depending on the computer you are using, the built-in Bluetooth adaptor may need to be turned on. If you do not
know how to turn on the Bluetooth adaptor or are unsure if your computer has a built-in Bluetooth adaptor, refer to
the operating instructions supplied with the computer.
Wake the computer up if the computer is in standby (sleep) or hibernation mode.
1
Turn on the headset.
2
Press and hold the
You will hear the voice guidance say, "Power on". Check that the indicator (blue) continues to flash after you release
your finger from the button.
If it has automatically connected to the last connected device, you will hear the voice guidance say, "Bluetooth
connected".
Check the connection status on the computer. If it is not connected, proceed to step 3.
Select the headset using the computer.
3
Select [Desktop] on the Start screen.
1.
2. Right-click the [Start] button, then select [Control Panel] from the pop-up menu.
Select [Hardware and Sound], then [Sound].
3.
(power) button for about 2 seconds.
59