Connecting To A Paired Bluetooth Device - Sony WI-1000XM2 Help Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WI-1000XM2

Connecting to a paired Bluetooth device

Turn on the headset.
1
Press and hold the
You will hear the voice guidance say, "Power on". Check that the indicator (blue) continues to flash after you release
your finger from the button.
If it has automatically connected to the last connected device, you will hear the voice guidance say, "Bluetooth
connected".
Check the connection status on the Bluetooth device. If it is not connected, proceed to step 2.
Make the Bluetooth connection from the Bluetooth device.
2
As for the operations on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth
device. When connected, you will hear the voice guidance say, "Bluetooth connected".
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the Bluetooth device.
Note
When connecting, [WI-1000XM2], [LE_WI-1000XM2], or both may be displayed on the connecting device. When both or [WI-
1000XM2] is displayed, select [WI-1000XM2]; when [LE_WI-1000XM2] is displayed, select [LE_WI-1000XM2].
If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply
turning on the headset. In that case, deactivate the Bluetooth function on the last-connected device or turn off the power.
(power) button for about 2 seconds.
71