Receiving A Call - Sony WI-1000XM2 Help Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WI-1000XM2

Receiving a call

You can enjoy a hands-free call with a smartphone or mobile phone that supports the Bluetooth profile HFP (Hands-free
Profile) or HSP (Headset Profile), via Bluetooth connection.
If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
The operation may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied
with the smartphone or mobile phone.
Only ordinary phone calls are supported. Applications for phone calls on smartphones or personal computers are not
supported.
Ring tone
When an incoming call arrives, a ring tone will be heard from the headset, and the indicator (blue) flashes quickly.
You will hear either of following ring tones, depending on your smartphone or mobile phone.
Ring tone set on the headset
Ring tone set on the smartphone or mobile phone
Ring tone set on the smartphone or mobile phone only for a Bluetooth connection
Connect the headset to a smartphone or mobile phone via Bluetooth connection beforehand.
1
When you hear the ring tone, press the
2
When an incoming call arrives while you are listening to music, playback pauses and a ring tone will be heard from
the headset.
You can talk using the microphone on the headset.
A: Microphone
If no ring tone is heard via the headset
The headset may not be connected with the smartphone or mobile phone over HFP or HSP. Check the
connection status on the smartphone or mobile phone.
If playback does not pause automatically, operate the headset to pause playback.
Adjust the volume by pressing the +/- buttons of the headset.
3
When the volume reaches the maximum or minimum, an alarm sounds.
When you finish your phone call, press the
4
(call) button on the headset and receive the call.
(call) button on the headset to end the call.
95