Sony WI-1000XM2 Help Manual page 34

Follow the on-screen instructions to complete the pairing and connection.
When the headset is connected with the smartphone, the indicator (blue) starts flashing slowly. You will hear the
voice guidance say, "Bluetooth connected".
To disconnect, touch the smartphone again with the headset. You will hear the voice guidance say, "Bluetooth
disconnected".
To connect a paired smartphone, perform step 3.
Unlock the screen of the smartphone if it is locked.
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the Android smartphone.
If you cannot connect the headset, try the following.
Unlock the screen of the smartphone if it is locked, and move the smartphone slowly over the N-Mark.
If the smartphone is in a case, remove the case.
Check that the Bluetooth function of the smartphone is enabled.
If you touch an NFC-compatible smartphone connected to another NFC-compatible device with the headset, the smartphone
terminates the Bluetooth connection with any current devices, and connects to the headset via one-touch (NFC) (One-touch
connection switching).
Related Topic
How to make a wireless connection to Bluetooth devices
Disconnecting the Android smartphone with one-touch (NFC)
Switching the device by one-touch (NFC)
Listening to music from a device via Bluetooth connection
34