Location And Function Of Parts - Sony WI-1000XM2 Help Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WI-1000XM2

Location and function of parts

1.
Noise canceling function microphones
Picks up the sound of the noise when the noise canceling function is in use.
2.
Left unit
3.
Earbuds
4.
Right unit
5.
Neckband
6.
Tactile dot
There is a tactile dot on the left unit.
7.
(right) mark
8.
N-Mark
9.
+ (volume +) button
There is a tactile dot on the + button. Use this dot as a guide when operating the headset.
10.
(play/call) button
11.
- (volume -) button
12.
C (custom) button
Operate when switching the noise canceling function and Ambient Sound Mode, etc.
13.
Call microphone
Picks up the sound of your voice when talking on the phone.
14.
(left) mark
15.
Built-in antenna
A Bluetooth antenna is built into the headset.
16.
USB Type-C port
Connect the headset to an AC outlet via a commercially available USB AC adaptor or to a computer with the supplied
USB Type-C cable to charge the headset.
17.
(power) button
18.
Headphone cable input jack
Connect a music player, etc. using the supplied headphone cable. Make sure that you insert the cable until it clicks. If
14