Controlling The Audio Device (Bluetooth Connection) - Sony WH-CH400 Help Manual

Wireless stereo headset

Hide thumbs Also See for WH-CH400:

Table of Contents

Help Guide

Wireless Stereo Headset

WH-CH400

Controlling the audio device (Bluetooth connection)

If the Bluetooth device supports AVRCP, you can control it on the headset. The functions available may vary depending

on the Bluetooth device. Refer to the operating instructions supplied with your Bluetooth device.

Each button has the following function:

Press once during pause to start playback.

Press once during playback to pause.

- (

)/+ (

)

Adjust the volume.

Press and hold until you hear a beep to skip to the beginning of the next track/beginning of the previous track (or the

current track during playback). After releasing the button, press within 1 second to skip to the beginning of the

next/previous track and hear a beep (you can repeat this operation).

Note

If the communication condition is poor, the Bluetooth device may react incorrectly to the operation on the headset.

The available functions may vary depending on the Bluetooth device. When you operate as illustrated above, it may operate

differently or may not work at all.

Table of Contents