Controlling The Audio Device (Bluetooth Connection) - Sony WF-1000XM5 Help Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WF-1000XM5

Controlling the audio device (Bluetooth connection)

If your Bluetooth device supports the device operating function (compatible profile: AVRCP), the following operations are
available. The available functions may vary depending on the Bluetooth device, so refer to the operating instructions
supplied with the device.
You can use the right headset unit to perform the following operations.
Play/Pause: Tap the touch sensor.
Skip to the beginning of the next track: Tap the touch sensor twice quickly (with an interval of about 0.3 seconds
between taps).
Skip to the beginning of the previous track (or the current track during playback): Tap the touch sensor 3 times
quickly (with an interval of about 0.3 seconds between taps).
Increase the volume: Tap the touch sensor quickly 4 or more times (with an interval of about 0.4 seconds or less
between taps) during music playback.
As you repeatedly tap the touch sensor, a notification sound is emitted and the volume increases by 1 step every 0.4
seconds, regardless of the number of times you tap.
When the volume reaches the maximum, an alarm sounds.
You can use the left headset unit to perform the following operations.
Decrease the volume: Tap the touch sensor quickly 4 or more times (with an interval of about 0.4 seconds or less
between taps) during music playback.
As you repeatedly tap the touch sensor, a notification sound is emitted and the volume decreases by 1 step every 0.4
seconds, regardless of the number of times you tap.
When the volume reaches the minimum, an alarm sounds.
Note
You cannot adjust the volume with the headset when no music is playing.
If the communication condition is poor, the Bluetooth device may react incorrectly to the operation on the headset.
90