Controlling The Audio Device (Bluetooth Connection) - Sony INZONE Buds Help Manual

Help Guide
Wireless Noise Canceling Gaming Headset
INZONE Buds

Controlling the audio device (Bluetooth connection)

When playing music, the following operations are available. The available functions may vary depending on the
Bluetooth device, so refer to the operating instructions supplied with the device.
You can use the right headset unit to perform the following operations.
Increase the volume: Tap the touch sensor on the right headset unit continuously during music playback.
As you repeatedly tap the touch sensor, the volume increases step by step according to the number of taps.
When the volume reaches the maximum, an alarm sounds.
Lower the volume: Hold your finger to the touch sensor on the right headset unit during music playback to lower the
volume continuously. Release your finger from the touch sensor at the desired volume level.
While touching the touch sensor, the volume lowers step by step.
When the volume reaches the minimum, an alarm sounds.
If the function of the headset unit is changed to [Playback control] on "INZONE Hub", you can perform the following
operations using the headset unit to which the function is assigned.
Play/Pause: Tap the touch sensor.
Skip to the beginning of the next track: Tap the touch sensor twice quickly.
Skip to the beginning of the previous track (or the current track during playback): Tap the touch sensor 3 times
quickly.
Note
You cannot adjust the volume with the headset when no music is playing.
If the communication condition is poor, the Bluetooth device may react incorrectly to the operation on the headset.
The available operations may vary depending on the connected device, the music software, or app used. In some cases, it may
operate differently or may not work even when the operations described above are performed.
55