Sony WI-1000XM2 Help Manual page 81

Help Guide
Wireless Noise Canceling Stereo Headset
WI-1000XM2
Listening to music from a device via Bluetooth connection
If your Bluetooth device supports the following profiles, you can enjoy listening to music and perform basic remote
control operation of the device from your headset via Bluetooth connection.
A2DP（Advanced Audio Distribution Profile）
You can enjoy high-quality music wirelessly.
AVRCP（Audio Video Remote Control Profile）
You can adjust the volume, etc.
The operation may vary depending on the Bluetooth device. Refer to the operating instructions supplied with the
Bluetooth device.
Connect the headset to a Bluetooth device.
1
Put on the headset.
2
Place the neckband around your neck so that the
right. There is a tactile dot on the
left and right units into a position where they fit well.
A: Tactile dot
Operate the Bluetooth device to start playback and adjust the volume to a moderate level.
3
Adjust the volume by pressing the +/- buttons of the headset.
4
When the volume reaches the maximum or minimum, an alarm sounds.
Hint
The headset supports SCMS-T content protection. You can enjoy music and other audio on the headset from a device such as a
mobile phone or portable TV that supports SCMS-T content protection.
Depending on the Bluetooth device, it may be necessary to adjust the volume or set the audio output setting on the device.
The headset volume during a call and during music playback can be independently adjusted. Changing the call volume does not
change the volume of music playback and vice versa.
(left) mark is on your left and the
(left) unit. Put the left and right units in your ears. Adjust the neckband and the
81
(right) mark is on your