Table of Contents
Advertisement
ADJUSTING SCREW (E) AND CAUSE
THE
BASIC
SETTING
ALIGNED.
Figure 2
Figure 3
ADJUSTING BLADE TENSION
Turn the blade tension hand-wheel
(A) (see Fig.4) clockwise to increase
or counterclockwise to decrease the
blade tension. The correct tension is
obtained when the blade is just tight
TO
BE
MIS-
9
enough so that no slippage occurs
between the blade and the wheels.
When the machine is not in use,
release the blade tension.
Figure4
ADJUSTING BLADE SUPPORT BEARING
1. Disconnect the machine from the
power source
2. The blade support bearing (A) (see
Fig.5) should be adjusted so it just
touches the back of the saw blade
after the blade is tracking properly.
3. Adjust the other blade support
bearing in the same manner.
Figure 5
Advertisement
Table of Contents
