General Information; General Indications; Documentation Indications; Required Torques And Tools - SORG Mio Move Service Record

2 General information

2.1 General indications

In the following all individual settings, adjustments and repairs as well as the yearly inspection of
the wheelchair are described. These adjustments require tools and specialised knowledge. Ple-
ase leave the adjustments to a qualified rehab consultant.
Should questions or suggestions come up then please contact your medical supply store or our
team (+49 7254 9279-0).

2.2 Documentation indications

Please note:
• Information about before sale can be found in the instructions for use
• Infomation for the user can be found in the instructions for use
• For maintenance instructions see: Chapter 4 (Repair & Maintenance)

2.3 Required torques and tools

For the following screws needed torque:
• M5: 5 Nm;
• M6: 7 Nm;
• M6 (axle plate) 10 Nm
• M8: 20 Nm;
• M10 (nut): 25 Nm; (caster)
• quick release axle fitting 40 Nm
Needed tools:
• torque wrench (5-50 Nm)
• open end wrench
• flex ratchet handle with socket wrench inserts
• hexagon screw driver
• Phillips screw driver
• flat head screw driver
• plastic mallet
• side cutter
• threadlocker (fluid)
• bicycle inner tube repair kit
• work bench/jaw vise with rubber pads
2019-07-16 Service Record Mio Move 5 of 32