Mount the Device
Mounting on the Wall
To mount the G250 on a wall, use the two mounting brackets without cable guides. If the wall is
flat, you can screw the G250 directly to the wall. If the wall is not flat, screw a 365 x 465 mm
(14.4" x 18.5") plywood board, 20 mm (7/8") thick, to the wall with wood screws. Fasten the
G250 to the plywood board. Affix a bracket to each side of the G250, as shown in
Figure 3: Wall mounting bracket placement
Note:
Avaya has developed special hardware platforms for customers with harsh
Note:
environmental conditions. These platforms were tested to meet strict physical
and environmental requirements imposed by the United States Navy for use on
their ships. The platforms make use of specialized racks and reinforcements.
Customers that want to obtain information about the design and implementation
of such a ruggedized solution can contact Avaya Navy Shipboard Services.
18 Quick Start for Hardware Installation Avaya G250 Media Gateway
Figure
3.