Chapter 6: Prepare For Configuration; Preparing A G250 With An S8300B Media Server - Avaya G250 Series Quick Start For Hardware Installation

Chapter 6: Prepare for Configuration

Before you prepare the G250 for configuration, ensure that you load the completed Electronic
Pre-Installation Worksheet onto the laptop. You should also load any firmware, license, or
authentication files that you have prepared onto the laptop.
Preparations for configuration differ depending on whether your G250 contains an S8300B
Media Server. The following section describes the preparation of a G250 that includes an
S8300B Media Server. If your G250 does not include an S8300B Media Server, skip to
Configuring a G250 without an S8300B Media Server

Preparing a G250 with an S8300B Media Server

You use the Avaya Installation Wizard (AIW) to configure the G250 with an S8300B. If a remote
technician is configuring the G250, see
configuration
To prepare the S8300B for configuration:
1. Connect the laptop you prepared to the Services port on the S8300B. Use a standard
Ethernet crossover cable.
2. Configure the network settings on the laptop, according to the following tables:
on page 32.
Table 3: TCP/IP settings
Setting
IP Address
Subnet Mask
DNS
WINS Servers
Table 4: Internet Explorer Settings
Setting
Proxy Server
on page 33.
Preparing the G250 with an S8300B for a remote
Value
192.11.13.5
255.255.255.252
disable
do not use (clear out any
values)
Value
disable
Issue 3 February 2007 27