Mounting The G430; Mounting On The Wall - Avaya G430 Quick Start For Hardware

Mounting the G430

1. Position the G430 in the rack. Ensure that there is adequate ventilation.
2. Verify that the screw holes are aligned with the rack hole positions.
3. Insert two mounting screws on each side.
4. Tighten the mounting screws. Avoid overtightening.
5. Verify that ventilation vents are not obstructed.
6. Verify that the G430 is level and horizontal.

Mounting on the Wall

To mount the G430 on a wall, use the two wall mounting brackets.
If the wall is flat, you can screw the G430 directly to the wall. If the wall is not flat, screw a 415 x 465 mm
(16.5 in. x 18.5 in.) plywood board, 20 mm (7/8 in.) thick, to the wall with wood screws. Affix a bracket to
each side of the G430, as shown in
fasten it to the plywood board.
Figure 4: Wall mounting bracket placement
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
Figure 4. Position the G430 so that its front panel is facing up, and
DRAFT - January 25, 2009 - 1:38 PM
Mounting on the Wall
Issue 1 May 2009 11