Print A Hard Copy; Form Feed The Print Item; Page Orientation; Number Of Items Printed On A Page - HP ESA-E Series Programmer's Manual

Front Panel
Access:

Print a Hard Copy

:HCOPy[:IMMediate]
The entire screen is output to the parallel port.
Front Panel
Access:

Form Feed the Print Item

:HCOPy:ITEM:FFEed[:IMMediate]
Sends the printer a command to form feed.
Front Panel
Access:

Page Orientation

:HCOPy:PAGE:ORIentation LANDscape|PORTrait
:HCOPy:PAGE:ORIentation?
Specifies the orientation of the print.
Landscape mode is not presently supported for PCL-3 printers.
NOTE
Factory Preset
and *RST:
Front Panel
Access:

Number of Items Printed on a Page

:HCOPy:PAGE:PRINts <integer>
:HCOPy:PAGE:PRINts?
Sets the number of display print outputs sent to print on one piece of
paper, before a form feed is sent.
Chapter 5
Print Setup, Color On Off
Print
Print Setup, Eject Page
The factory default is Landscape. This parameter is
persistent, which means that it retains the setting
previously selected, even through a power cycle.
Print Setup, Orientation, Landscape
Print Setup, Orientation, Portrait
Language Reference
HCOPy Subsystem
5-51