HP ESA-E Series Programmer's Manual page 341

HP 8590-Series
Analyzers
Command(s)
PP
[:SENSe]:POWer[:RF]:PCENter
PR
PREAMPG
[:SENSe]:CORRection:OFFSet [MAGNitude] <rel_ampl>
PREAMPG? [:SENSe]:CORRection:OFFSet[MAGNitude]?
PREFX
PRINT
Corresponding SCPI Command(s) Description/Comments
Performs a preselector peak.
Centers the preselector tracking to
maximize amplitude of the signal at the
specified marker by minimizing the loss
through the filter.
This command applies only to the following
HP ESA spectrum analyzer models:
HP E4404B
HP E4405B
HP E4407B
HP E4408B
Moves the pen to a new plot location on the
spectrum analyzer screen relative to the
current coordinates in display units.
Subtracts a positive or negative
preamplifier gain value from the displayed
signal.
The HP 8590-Series analyzer outputs data
in the format: 10.00. The HP ESA analyzer
outputs data in the format:
+1.00000000E+001.
Specifies or changes the prefix used in save
and recall operations.
Initiates output of the spectrum analyzer
display to a printer.