HP ESA-E Series Programmer's Manual page 362

HP 8590-Series
Analyzers
Command(s)
VAVG
VAVG <number> [:SENSe]:AVERage:COUNt <integer>
VAVG ON/OFF [:SENSe]:AVERage[:STATe] OFF|ON|0|1
VAVG? [:SENSe]:AVERage:COUNt?
VB
VB <value> [:SENSe]:BANDwidth|BWIDth:VIDeo <freq>
VB AUTO [:SENSe]:BANDwidth|BWIDth:VIDeo:AUTO OFF|ON|0|1
VB UP|DN
VB? [:SENSe]:BANDwidth|BWIDth:VIDeo?
Corresponding SCPI Command(s) Description/Comments
Enables the video-averaging function,
which averages trace points to smooth the
displayed trace.
Specifies the number of measurements
that are combined.
Specifies the number of measurements
that are combined. The value of successive
measurements can be combined together to
average out measurement variations.
The HP 8590-Series analyzer returns the
count in the format: 100 when VAVG is ON,
and returns 0 when VAVG is OFF. The
HP ESA analyzer returns +100 when
VAVG is ON, and returns 0 when VAVG is
OFF.
Specifies the video bandwidth.
Couples the video bandwidth to the
resolution bandwidth.
The HP 8590-Series analyzer outputs data
in the format: 750000000. The HP ESA
analyzer outputs data in the format:
+750000000.