HP ESA-E Series Programmer's Manual page 315

HP 8590-Series
Analyzers
Command(s)
GDRVPWID
GDRVRBW
GDRVREFE
GDRVST
GDRVSWAP
GDRVSWDE
GDRVSWP
GDRVUTIL
GDRVVBW
GETPLOT
Corresponding SCPI Command(s) Description/Comments
Enters the specified value as the pulse width.
Specifies the gate time length in seconds. For
EDGE triggering only.
Couples or uncouples the resolution bandwidth
to the specified pulse width.
Allows you to enter the position (in time) for a
reference edge.
Couples or uncouples the sweep time to the
pulse repetition interval.
Makes the window (either the time or
frequency window) that is currently not the
active window, the active window.
Allows you to specify the delay from the edge of
the gate trigger until the sweep is started in
the time window.
Specifies the sweep time for the time domain
window of the gate utility.
Turns the gate utility on or off.
Couples or uncouples the video bandwidth to
the gate length.
Initiates output of the spectrum analyzer
display to a plotter.