HP ESA-E Series Programmer's Manual page 177

Peak to Peak Delta Markers
:CALCulate:MARKer[1]|2|3|4:PTPeak
Positions delta markers on the highest and lowest points on the trace.
Factory Preset
and *RST: Off
Front Panel
Access:
Search, Pk-Pk Search
Set Center Frequency to the Marker Value
:CALCulate:MARKer[1]|2|3|4[:SET]:CENTer
Sets the center frequency equal to the specified marker frequency,
which moves the marker to the center of the screen. In delta marker
mode, the center frequency is set to the marker delta value. This
command is not available in zero span.
Front Panel
Access:
Marker –>, Mkr –> CF
Set Reference Level to the Marker Value
:CALCulate:MARKer[1]|2|3|4[:SET]:RLEVel
Sets the reference level to the specified marker amplitude. In delta
marker mode, the reference level is set to the amplitude difference
between the markers.
Front Panel
Access:
Marker –>, Mkr –> Ref Lvl
Search, Meas Tools, Mkr –> Ref Lvl
Set Span to the Marker Value
:CALCulate:MARKer[1]|2|3|4[:SET]:SPAN
Sets the span to the value of the specified marker frequency. The
specified marker must be in delta mode. Select the delta marker mode
with CALCulate:MARKer[1]|2|3|4:MODE DELTa. This command is
not available in zero span.
Front Panel
Marker, Delta, Marker –>, Mkr ∆ –> Span
Access:
Set Start Frequency to the Marker Value
:CALCulate:MARKer[1]|2|3|4[:SET]:STARt
Sets the start frequency to the value of the specified marker frequency.
In delta marker mode, the start frequency is set to the marker delta
value. This command is not available in zero span.
Chapter 5
Language Reference
CALCulate Subsystem
5-23