HP ESA-E Series Programmer's Manual page 321

HP 8590-Series
Analyzers
Command(s)
LIMIMIRROR
<no equivalent SCPI command>
LIMIMODE
:CALCulate:LLINe[1]|2:TYPE UPPer|LOWer
LIMIREL
:CALCulate:LLINe:CMODe FIXed|RELative
LIMISEG
:CALCulate:LLINe[1]|2:DATA:MERGe
<x-axis>,<ampl>,<connected>
{<x-axis>,<ampl>,<connected>}
Corresponding SCPI Command(s) Description/Comments
Reflects the current definition about the
amplitude axis at the largest frequency or the
largest sweep time in the definition.
There is no similar function in HP ESA
analyzers.
Determines whether the limit-line entries are
treated as upper amplitude values, lower
amplitude values, upper and lower amplitude
values, or mid-amplitude and delta values.
Specifies the current limit lines as fixed or
relative.
Adds new segments to the current frequency
limit line in either the upper limit line or the
lower limit line.
<x> is frequency in Hz.
<ampl> is amplitude in dB.
<connected>: 1 = connected, and 2 = not
connected.