Advertisement
Blind control system
Blind controller insert without auxiliary input
Plugging the sensor cable into the cover
It is only possible to connect the sun sensor to the cover if a corresponding socket is present.
This is not the case for all covers with sensor evaluation.
o
Insert plug (12) into the socket of the insert (11) (Figure 6).
5 Appendix
5.1 Technical data
Rated voltage
Mains frequency
Ambient temperature
Contact type
Length of the sensor cable
Connection
Motors
Data according to EN 60730-1
Action
Degree of soiling
Measured surge voltage
SELV limit value
5.2 Warranty
The warranty is provided in accordance with statutory requirements via the specialist trade.
Please submit or send faulty devices postage paid together with an error description to your
responsible salesperson (specialist trade/installation company/electrical specialist trade). They
will forward the devices to the Gira Service Center.
32537112
10860473
Figure 6: Sun sensor on the cover
11.09.2013
AC 230 V ~
50 Hz
0 ... +55 °C
µ contact
max. 20 m
1000 W
1.B
2
4000 V
DC 12 V
5/6
Advertisement
