Gira 0570 00 Operating Instructions

Flush-mounted bus coupler

Table of Contents

Download this manual

KNX/EIB

Flush-mounted bus coupler

Order-No. : 0570 00

Operating instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Failure to observe the instructions may cause damage to the device and result in fire and

other hazards.

During renovation work, protect the device against soiling through paint, wallpaper

paste, dust, etc. Device can be damaged.

During installation and cable routing, comply with the regulations and standards which

apply for SELV circuits.

These instructions are an integral part of the product, and must remain with the end

customer.

32503022

10499042 I00

Figure 1: Bus coupling unit – front view

25.05.2011

1/3

Table of Contents

Do you have a question about the 0570 00 and is the answer not in the manual?

Page 1 KNX/EIB Flush-mounted bus coupler Flush-mounted bus coupler Order-No. : 0570 00 Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions may cause damage to the device and result in fire and other hazards.
Page 2 KNX/EIB Flush-mounted bus coupler Figure 2: Bus coupling unit – rear view (1) Programming LED (2) Programming button (3) Application interface (4) Bus connection 3 Function System information This device is a product of the KNX system and complies with the KNX directives. Detailed technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
Page 3 The warranty is provided in accordance with statutory requirements via the specialist trade. Please submit or send faulty devices postage paid together with an error description to your responsible salesperson (specialist trade/installation company/electrical specialist trade). They will forward the devices to the Gira Service Center. Gira Giersiepen GmbH & Co. KG...