Henny Penny FlexFusion GAS PLATINUM COMBI Series Operating Manual page 39

Standby mode
Deactivate the operation inhibit to set the standby mode.
When the standby mode is active, the touchscreen goes dark after a
set time. The cooking chamber light switches off.
Setting the background lighting
This setting is used to reduce the brightness of the touchscreen.
CombiDoctor
CombiDoctor uses a selectable self-diagnostic program to check the
components for climate control and cleaning.
Delete user's own cooking programs
Delete all the cooking programs created by the user.
Setting units
Set the units for temperature and liquid quantities.
The possibilities for temperature are °C and °F.
The possibilities for volume are mL, fl.oz (Imp.) and fl.oz (US)
Display the error memory
Retrieve stored faults for forwarding to service partners.
Import HansDampf programs
Import existing HansDampf programs.
Importing manufacturer's cookbook
Import the cookbooks provided by the manufacturer.
Select cookbook
Select the cookbooks typical of the country.
Cookbook lock
Lock function for the cooking programs in autoChef.
Setting Function
Unlocked Deleting, changing and overwriting the cooking programs is
possible
Disabled Changes in the cooking steps, for example temperature
increases, are possible. The preset values apply again the
next time the cooking program is selected.
Fully locked The cooking program can only be used in the way it has
been stored. Changes in the cooking steps are not possible.
Exporting log data
Export of log data for forwarding to the service technician.
Load OEM settings
Special settings can be loaded.
Operating instructions
Operating the unit
39