Inserting And Removing The Usb Stick; Using The Core Temperature Sensor - Henny Penny FlexFusion GAS PLATINUM COMBI Series Operating Manual

Table of Contents

Advertisement

6.6.21 Inserting and removing the USB stick

Prerequisite USB stick with a minimum of 2 GB and maximum of 32 GB available
Prerequisite Exporting or importing of data completed

6.7 Using the core temperature sensor

WARNING
CAUTION
2. Create a folder named "autoChefImages".
Data exchange of photos in PNG format, resolution of 95x69
pixels, maximum resolution 150 KB.
3. Create a folder named "FCBrowserFiles".
Data exchange of text in HTML format.
4. Create a folder named "FCImport".
Data exchange from cookbooks.
5. Create a folder named "MMIContent".
Data exchange of additional imported content.
6. Create a folder named "MMiUpdate".
Data exchange of update files.
Once the folder structure has been completed, the USB flash drive
is ready for use.
Inserting the USB stick
storage capacity (not included with delivery)
USB stick not write-protected
Insert the USB flash drive.
The USB stick is ready after at most 20 seconds.
Removing the USB stick
Remove the USB stick.
Risk of injury from a bursting core temperature sensor
• The core temperature sensor can burst as the result of overheating of the
measuring tip.
• Never heat a core temperature sensor with a cigarette lighter or other heat
source.
Risk of burns from hot surfaces
• Grasp the core temperature sensor by the handle, remove it from the
cooked food and carefully place it into the holder.
• Protect arms and hands by wearing suitable protective gloves.
Operating instructions
Operating the unit
69

Advertisement

Table of Contents
loading

Table of Contents